Microwave Photonics for Modern Radar Systems

The emerging new concepts and technologies based on microwave photonics have led to an ever-increasing interest in developing innovative radar systems with a net gain in functionality, bandwidth/resolution, size, mass, complexity and cost when compared with the traditional implementations. This paper describes the techniques de- veloped in the last few years in microwave photonics that might revolutionize the way to design multifunction radar systems, with an emphasis on the recent advances in optoelectronic oscillators （OEOs）, arbitrary waveform gener- ation, photonic mixing, phase coding, filtering, beamforming, analog-to-digital conversion, and stable radio-fre- quency signal transfer. Challenges in implementation of these components and subsystems for meeting the technique requirements of the multifunction radar applications are discussed.     

考虑非理想噪声干扰的直升机飞行动力学模型辨识方法

利用MATLAB/SIMULINK平台搭建了直升机仿真实验系统，并以UH-60直升机为对象实现了考虑非理想噪声干扰的仿真飞行实验。建立了非理想噪声数学模型并基于增广最小二乘法设计 了一套同时考虑模型参数和噪声参数的综合辨识算法，在此基础上，利用仿真实验数据实现了UH-60直升机纵向飞行动力学模型的辨识与验证。最后，通过与普通最小二乘法的对比验证了本文方法的优越性。      

基于型面节点的复合材料构件模具型面修正研究

针对复合材料在热压罐中固化变形造成的零件尺寸误差、带应力装配、降低疲劳寿命等长期困扰航空、航天工业的问题,研究复合材料固化变形的影响因素、作用机理等,并利用基准点的位置坐标,实现两曲面间的匹配,提出变形修正的算法和切实可行的修正手段,从而在模具设计时对模具型面做相应的补偿,减少试模、修模次数,实现复合材料固化变形的有效控制,达到复合材料精准制造的目的。     

风车状态下转子性能及通道内流动分析

为探究低展弦比压气机转子在风车状态下由压气机模式向涡轮模式转化过程中性能、内部流场结构以及气动损失的演化过程,提出了一种基于叶片和流体间能量传递的简化数值计算方法,以获得某转速下的风车状态临界流量点。在数值模拟的基础上,重点对比了同一转速线上压气机工况点(小流量工况)、风车临界点和涡轮工况点下叶尖泄漏损失的演化机制,同时探究了叶片通道内流动分离的演化过程。 结果显示,随着转速的增加,转子风车状态临界流量呈现近似线性的变化趋势。而同转速下随流量增大,叶尖泄漏流从吸力面流向压力面,并与压力面上的低能量流体进行掺混,造成了流动堵塞。同时,从压气机模式转向涡轮模式的过程中,叶尖区域的流动分离从吸力面分离转变为压力面分离,随后分离强度和尺寸逐渐增大,造成的气动损失显著增加;而在轮毂区域,流动分离始终保持吸力面分离,其分离尺度沿径向有所发展。     

SF6分解气的近红外在线检测技术研究

为满足SF6绝缘电气设备故障监测与预警的实际需求,分析了国内分解气检测研究现状.对比近红外与中红外吸收光谱检测技术,提出近红外吸收光谱技术在线检测的技术方案.计算分析待测气体特征谱线的吸收系数、吸收光程和电路信噪比对精度的影响,完成系统参数设计.提出SF6分解气在线检测系统方案,实现对H2S、HF和CO这3种气体测量.数据分析表明,系统检测精度优于5×10-7,表明该系统满足电力行业在线测量的需求.     

打造雄鹰的“禽爪”——从T-38看教练机的研制与选择

回顾了对美国空军现役T-38高级教练机的研制思路,总结了美国空军选择和使用T-38的原则和方法,提出了教练机研发需要考虑的多项问题.     

气动换向阀阀芯/阀座撞击特性研究

针对某型气动换向阀在研制过程中出现由于阀芯/阀座撞击变形导致阀芯卡死的现象,对阀芯/阀座的撞击特性进行了仿真研究,定量分析了撞击过程以及不同阀座高度对撞击特性的影响,根据仿真结果对换向阀进行了改进设计,试验结果表明改进后的换向阀满足使用要求.     

Matching suitable feature construction for SAR images based on evolutionary synthesis strategy

In the paper,a set of algorithms to construct synthetic aperture radar（SAR）matching suitable features are frstly proposed based on the evolutionary synthesis strategy.During the process,on the one hand,the indexes of primary matching suitable features（PMSFs）are designed based on the characteristics of image texture,SAR imaging and SAR matching algorithm,which is a process involving expertise;on the other hand,by designing a synthesized operation expression tree based on PMSFs,a much more flexible expression form of synthesized features is built,which greatly expands the construction space.Then,the genetic algorithm-based optimized searching process is employed to search the synthesized matching suitable feature（SMSF）with the highest effciency,largely improving the optimized searching effciency.In addition,the experimental results of the airborne synthetic aperture radar ortho-images of C-band and P-band show that the SMSFs gained via the algorithms can reflect the matching suitability of SAR images accurately and the matching probabilities of selected matching suitable areas of ortho-images could reach 99±0.5%.